贴片led发光电流

Anyone who says that the centuries old game of Chess cannot be improved upon has obviously never played with a glowing chess board. Today we take a look at a cheap glass chess set modded to glow from within.

谁说不能改善已经存在数百年历史的国际象棋，显然谁从来没有玩过发光的棋盘。 今天，我们来看一看便宜的玻璃国际象棋棋盘，该棋盘经过改装可以从内部发光。

Instructables user Tetranitrate had a glass chess set he scored on-the-cheap and had always wanted to illuminate it in some way. He ruled out illuminating the board itself (no good way to keep track of the piece colors) and putting a battery in each piece (too big of a pain, over complicates the design).

可指导用户Tetranitrate的玻璃棋盘很便宜，他一直想以某种方式对其进行照明。 他排除了照亮电路板本身的问题(没有很好的方法来跟踪部件的颜色)，并且在每块部件中都装了一块电池(这太麻烦了，使设计复杂化了)。

His final solution, the one seen in the photo here, was to build a wood and copper board, run a low voltage across the surface of the chess board, and affix a conductive copper ring to the bottom of each chess piece to power the LED embedded inside. In this manner the pieces would glow on the board and then go dark as soon as they were removed from play.

他的最终解决方案(在此处的照片中看到)是建造一块木板和一块铜板，在棋盘的表面施加低电压，并在每个棋子的底部贴上一个导电铜环，为LED供电。嵌入其中。 以这种方式，这些棋子会在棋盘上发光，然后从游戏中移开后就会变黑。

Hit up the link below for additional details on the build and instructions on building your own.

点击下面的链接，获取有关构建的更多详细信息以及构建自己的说明。

[Instructables]

[教学内容]

翻译自:

贴片led发光电流